Elboxrf Logo. Go to frontpage. Antena mikropaskowa. Antena panelowa. Antena sektorowa. Antena wlan. Anteny mikropaskowe. Anteny panelowe. Anteny sektorowe. Anteny wlan. Microstrip antenna. Panel antenna. Sector antenna. Wlan antenna.

PL | EN

About
Technology
Contact
Products
Prices
Terms & Conditions
TetraBox_5_23_10_RSLL

TetraBox_5_23_10_RSLL

23dBi Directional Reduced Sidelobe Level Panel Antenna with the housing

This product as standard consists of 23 dBi antenna and IP66 housing. If necessary, feedthrough, RPSMA to UFL pigtail and universal mounting kit has to be ordered additionaly. For more info see ORDERING & SHIPPING DATA.

  • The top performance 5 GHz antenna - provides outstanding data troughput
  • Very wideband directional antenna - supports U-NII and HIPERLAN standard - 5.0 to 6.0 GHz
  • DC short - as all Elboxrf's antennas - for static electricty protection and a low-frequency grounding
  • Extremaly high data troughput due to the "RSLL" technology
  • Highly suppersion of unnecessary sidelobes - a "Reduced Sidelobe Level" antenna
  • Is equipped with a high quality mast mounting hardware allowing accurate elevation adjust
  • Can be mounted for a horizontal or vertical polarization. The picture shows an antenna in horizontal polarization - the E vector plane is parallel to the ground plane
  • Very rugged and completely weatherproof for long life in the harshest environments. The all stainless steel fasteners and aluminum bracket resist corrosion


TetraBox_5_23_10_RSLL is the integrated solution of top performance TetraAnt_5_23_10_RSLL antenna with outstanding quality box. IP66 equipment box is made of polycarbonate that features extreme operation temperature (-40ºC +60ºC) and high impact resistance.

TetraBox_5_23_10_RSLL antenna has the new developed radiating element. The changes are for the feed line to accomodate the capacitance/inductive component of the SMA/RP connector. As the result we have exceptional good VSWR.

The TetraBox_5_23_10_RSLL antenna is equipped with the strong bracket, universal mounting kit for a routerboard and high-quality cable feedthrough.

Any routerboard can be fitted safely in a 5 minute time by means of the glue-tape attached to the special mounting element (4 pcs). The tape is an aerospace quality and preasure sensitive, so it delivers the ultimate bond strength after 72 hours.



Frequency: 5100 MHz - 5900 MHz
Impedance: 50 Ohm
VSWR: < 2.0
Gain: 23.5 dBi +/- 0.5dB
Polarization: Linear, Horizontal/Vertical
Half power beamwidth - HPBW, H vector: 10 degrees
Half power beamwidth - HPBW, E vector: 10 degrees
Sidelobe supression: >23 dB
Crosspolar rejection: t.b.d.
Front to back ratio: >25 dB
Lightning protection: DC ground