|
| Frequency: | 5100 MHz - 5900 MHz
|
|---|
| Impedance: | 50 Ohm
|
|---|
| VSWR: | <1.5 |
|---|
| Gain: | 19 dBi +/- 0.5dB
|
|---|
| Polarization: | Linear, Horizontal/Vertical
|
|---|
| Half power beamwidth - HPBW, H vector: | 20 degrees
|
|---|
| Half power beamwidth - HPBW, E vector: | 20 degrees
|
|---|
| Sidelobe supression: | > 20 dB
|
|---|
| Crosspolar rejection: | t.b.d.
|
|---|
| Front to back ratio: | >25 dB |
|---|
| Lightning protection: | DC ground
|
|---|
| 5.2 GHz | 5.4 GHz | 5.6 GHz | 5.8 GHz | | 17+/- 0.5dB | 18.5+/- 0.5dB
| 18.5+/- 0.5dB
| 18.5+/- 0.5dB
|
 Horizontal - measured
Note the scale - 40 dB
RSLL !
| 
Vertical - measured
Note the scale - 40 dB
RSLL !
| 
S11 (mag.) |
| Technology: | Microstrip, Reduced Sidelobe Level
|
|---|
| Input connector: | N, Female
|
|---|
| Dimensions, HxWxD: | 165x165x35 mm, with the connector
|
|---|
| Weight: | 0,35 kg with the mounting hardware
|
|---|
| Radome material: | White UV - resistant plastic
|
|---|
| Base material: | High strength aluminum alloy
|
|---|
| Construction: | All - weather operation
|
|---|
| Mounting Kit: | Includes mast mounting hardware, 2 inch (50.8 mm) max.
|
|---|
| Catalogue model: | TetraAnt_5_19_20_RSLL (5 GHz, 19 dBi, 20 degrees)
|
|---|
| Packing: | Carton, 18x18x5 cm, 0.4 kg
|
|---|
| Bulk packing - 10 PCY: | Carton, 19x19x50 cm, 4.2 kg
|
|---|
*All specifications are subject to change without notice
Because an antenna works in the real environment, it usually sees many manmade and natural sources of background noise like a thermal noise from the ground, cosmic noise, sun, lightnings, discharges and so on.
So that the microwave power delivered to the radio will be the desired signal and noises collected from various sources.
Noise may be received through the main beam of the antenna pattern and through sidelobes. We have a very little chance to suppress noises received through the main beam, but we can to control the level of highly undesired sidelobes.
The new series of RSLL antennas have the sidelobes level reduced by no less than a 20dB compared to the main beam.
It means that the RSLL antenna will receive much less noise and undesired microwave power from other WLAN subscribers than a standard antenna. Read more 
Info about obsolete products:
This product is no longer available.
TetraAnt 5800/19 (2005)
- The new antenna that supports European HIPERLAN standard - 5.475 to 5.725 GHz.
- It has gain 19 dBi and is internally DC grounded for lightning protection.
- Is a vertically or horizontally polarized.
- It is designed for all weather operation. The array is enclosed in an aluminum-alloy baseplate with an ultraviolet-stable STAREX ABS radome.
- The TetraAnt 5800/19 is indoor or outdoor pole mounted with the high quality construction grade Al-alloy bracket.
|  |
ELECTRICAL SPECIFICATIONS
| Frequency: | 5.250 GHz - 5.725 GHz |
|---|
| Impedance: | 50 Om |
|---|
| VSWR: | < 1.5 |
|---|
| Gain: | 19 dB
|
|---|
| Polarization: | Horizontal/Vertical
|
|---|
Half power beamwidth - HPBW, E vector:
| 17 degrees |
|---|
| Half power beamwidth - HPBW, H vector: | 17 degrees |
|---|
Front to back ratio:
| >25 dB |
|---|
| Lightning protection: | DC ground
|
|---|
PATTERNS & MATCH
| Horizontal
Note the scale - 40 dB | 
Vertical
Note the scale - 40 dB | S11 |
TECHNICAL SPECIFICATIONS
| Technology: | Microstrip
|
|---|
| Input Connector: | N, Female
|
|---|
| Dimensions: | 165x165x35 mm, w/o connector
|
|---|
| Weight: | 0,45 kg, with mounting kit & carton - 0.6 kg
|
|---|
| Radome material: | UV - inhibited ABS
|
|---|
| Colour: | White
|
|---|
| Base material: | Al, powder painted
|
|---|
| Construction: | All - weather operation
|
|---|
Mounting Kit:
| Includes mast mounting hardware, 2 inch (50.8 mm) O.D. pipe max.
|
|---|
| Catalogue model: | EPA-5800-19-20-V/H
|
|---|
This product is no longer available.
TetraAnt_5_19_16 (2005/January_2006)
- Very wideband directional antenna - supports U-NII and HIPERLAN standard - 5.0 to 6.0 GHz
- DC short - as all Elboxrf's antennas - for static electricty protection and a low-frequency grounding
- Good impedance matching for 5.2 to 5.9 GHz
- Is equipped with a high quality mast mounting hardware allowing accurate elevation adjust
- Can be mounted for a horizontal or vertical polarization. The picture shows an antenna in horizontal polarization - the H vector plane is parallel to a ground plane
- Very rugged and completely weatherproof for long life in the harshest environments. The all stainless steel fasteners and aluminum bracket resist corrosion
| 
TetraAnt 5GHz 19 dB |
ELECTRICAL SPECIFICATIONS
| Frequency: | 5200 MHz - 5900 MHz |
|---|
| Impedance: | 50 Om |
|---|
| VSWR: | < 2.0 |
|---|
| Gain: | 18.5 dBi +/- 0.5dB
|
|---|
| Polarization: | Linear, Horizontal/Vertical
|
|---|
Half power beamwidth - HPBW, E vector:
| 16 degrees |
|---|
| Half power beamwidth - HPBW, H vector: | 16 degrees |
|---|
Sidelobe supression:
| > 13 dB |
|---|
| Crosspolar rejection: | t.b.d. |
|---|
| Front to back ratio: | > 25 dB
|
|---|
| Lightning protection: | DC ground
|
|---|
PATTERNS & MATCH
| Horizontal
Note the scale - 40 dB |
Vertical
Note the scale - 40 dB | S11 (mag.) |
TECHNICAL SPECIFICATIONS
| Technology: | Microstrip
|
|---|
| Input Connector: | N, Female
|
|---|
| Dimensions: | 165x165x35 mm, with the connector
|
|---|
| Weight: | 0,35 kg with the mounting hardware
|
|---|
| Radome material: | White UV - resistant plastic
|
|---|
| Base material: | High strength aluminum alloy
|
|---|
| Construction: | All - weather operation
|
|---|
Mounting Kit:
| Includes mast mounting hardware, 2 inch (50.8 mm) max.
|
|---|
| Catalogue model: | TETRAANT_5_19_16_L (5 GHz, 19 dBi, 16 deg., Linear)
|
|---|
GAIN VS FREQUENCY
| 5.2 GHz | 5.4 GHz | 5.6 GHz | 5.8 GHz | | 17+/- 0.5dB | 18+/- 0.5dB | 18.5+/- 0.5dB | 18.5+/- 0.5dB |
This product is no longer available.
TetraAnt 5800/19 (2004/2005)
- The new antenna that supports European HIPERLAN standard.
- It has gain 19 dBi and is internally DC grounded for lightning protection.
- Is vertically or horizontally polarized.
- It is designed for all weather operation. The array is enclosed in an aluminum-alloy baseplate with an ultraviolet-stable STAREX ABS radome.
- The TetraAnt 5800/19 is indoor or outdoor pole mounted with the tilt adjust.
|  |
ELECTRIAL SPECIFICATIONS
| Frequency: | 5.470 GHz - 5.725 GHz |
|---|
| Impedance: | 50 Om |
|---|
| VSWR: | < 1.5 |
|---|
| Gain: | 19 dB
|
|---|
| Polarization: | Horizontal/Vertical
|
|---|
Half power beamwidth - HPBW, E vector:
| 17 degrees |
|---|
| Half power beamwidth - HPBW, H vector: | 17 degrees |
|---|
Front to back ratio:
| >25 dB |
|---|
| Lightning protection: | DC ground
|
|---|
PATTERNS & MATCH
| Horizontal
Note the scale - 40 dB |
Vertical
Note the scale - 40 dB | VSWR |
TECHNICAL SPECIFICATIONS
| Technology: | Microstrip
|
|---|
| Input Connector: | N, Female
|
|---|
| Dimensions: | 210x210x30 mm, w/o connector
|
|---|
| Weight: | 0,45 kg, with mounting kit & carton - 0.6 kg
|
|---|
| Radome material: | UV - inhibited ABS
|
|---|
| Colour: | White
|
|---|
| Base material: | Al, powder painted
|
|---|
| Construction: | All - weather operation
|
|---|
Mounting Kit:
| Includes mast mounting hardware, 2 inch (50.8 mm) O.D. pipe max.
|
|---|
| Catalogue model: | EPA-5800-19-20-V/H
|
|---|
TetraAnt_5_19_20_RSLL, Directional antenna, 19 dBi, Reduced Sidelobe LevelMinimum quantity: 10 pcs Dimensions and weight of packing: 19x19x50 cm, 4.2 kg Price: Pricelist
|
