TetraAnt_2_14_35

14dBi Directional Panel Antenna

• Brand new antenna for a 2.45 GHz band
  

• DC short - as all Elboxrf's antennas - for static electricty protection and a low-frequency grounding
  

• Good impedance matching for 2.4 to 2.5 GHz
  

• Is equipped with a high quality mast mounting hardware allowing accurate elevation adjust
  

• Can be mounted for a horizontal or vertical polarization. The picture shows an antenna in horizontal polarization - the H vector plane is parallel to a ground plane

• Very rugged and completely weatherproof for long life in the harshest environments. The all stainless steel fasteners and aluminum bracket resist corrosion
  

TetraAnt_2_14_35 is the redesigned TetraAnt_2450/14 - during the years we have introduced a dosen improvements in the construction for a better clients satisfaction.

We have changed the radiating element in that way that antenna is more immune for an interfering signal come from distant stations, outside of a mainbeam direction. The sidelobe level is slightly reduced - by a 5 dB’s, compared to the standard antenna, where this level is 13dB below the mainbeam.

As a result, the new TetraAnt_2_14_35 delivers more "cleaner" and a more stable signal than any other microstrip antenna with compared dimensions/gain.

But, if you are looking for a really reduced sidelobe level antenna we have designed a very high quality TetraAnt_2_19_20_RSLL antenna, where the sidelobe suppresion is a better than 20dB. It delivers a very strong and clean (high S/N) microwave power even in the most interfering environment.