TetraAnt 2 14 35
14 dBi Directional Panel Antenna
Important Feature:
Additonal Legal Information
TetraAnt_2_14_35 is the redesigned TetraAnt_2450/14 - during the years we have introduced a dosen improvements.
We have changed the radiating element in that way that antenna is more immune for an interfering signal come from distant
stations, outside of a mainbeam direction. The sidelobe level is slightly reduced - by a 5 dB’s, compared to the standard antenna,
where this level is 13dB below the mainbeam.
As a result, the new TetraAnt_2_14_35 delivers more "cleaner" and a more stable signal than any other microstrip antenna
with compared dimensions/gain.
But, if you are looking for a really reduced sidelobe level antenna we have designed a very high quality TetraAnt_2_19_20_RSLL antenna, where the sidelobe suppresion is a better than 20dB. It
delivers a very strong and clean (high S/N) microwave power even in the most interfering environment.
|
 [FIG.3] 2 GHz, 14 dBi  [FIG.4] 3D draw  [FIG.5] VSWR 2.4 to 2.5 GHz |
| ELECRICAL | PROPERTIES |
|---|---|
| Frequency: | 2.4 GHz - 2.5 GHz |
| VSWR: | < 1.7 in the whole operating band - see FIG. 5 |
| Gain: | 13.5 dBi |
| Polarization: | Linear |
| Elevation HPBW: | 39 deg |
| Azimuth HPBW: | 38 deg |
| Sidelobe supression: | Better than 18 dB - see FIG. 1 |
| Crosspolar rejection: | Better than 15 dB - see FIG. 1 and FIG. 2 |
| Front to back ratio: | Better than 20 dB - see FIG. 1 and FIG. 2 |
| Lightning protection: | DC ground |
| MECHANICAL | PROPERTIES |
|---|---|
| Technology: | Microstrip |
| Connector/Location: | N Female/Back |
| Dimensions: | 165x165x35 mm with the connector |
| Weight: | 0.4 kg with the mounting hardware |
| Radome material: | PVC, white |
| Base material: | High strength aluminum alloy |
| Construction: | All - weather operation |
| Mounting kit: | Includes mast mounting hardware, 2 inch (51mm) max. |
| Catalogue model: | TetraAnt_2_14_35 |
| Packing: | Carton, 17x18x5 cm, 0.4kg |
